S7000: Technique
Home S7000: Diagram S7000: Cheat Sheet S7000: Technique

Fuji FinePix S7000 Spot Metering operational cheat sheet

A reader reviews the spot metering book at amazon.com

amaz1.jpg (95449 bytes)

If you do not want to read the book titled "the confused photographer's guide to on-camera spotmetering (spot metering / partial metering)
ISBN: 0966081706" simply read the following:
(Based on Farzad's 5-stop Film / Digital Zone System ©1987-2007)

The on-camera spotmeter (spot meter / partial meter) is the most powerful exposure tool in the world. Read the following page and decide for yourself if you understand the concept. If you do understand everything on the following page, and you can apply the technique described and produce correctly exposed images, then that is all you need! If, however, you even have the slightest doubt about this technique, or if you are still the least bit confused, this book is for you.
Remember: either you know how to use your on-camera spot meter effectively or you don’t. There is no in-between! I believe this is the simplest, easiest, best illustrated, and most practical book about on-camera spotmetering in the world.

Cheat sheet: The entire book condensed onto one page (well almost!)


Set the ISO of your Fuji FinePix S7000 to 100 and choose an outdoor subject. Activate the Spot metering/Partial Metering option on your Fuji FinePix S7000 and set your camera’s mode to manual and to the shutter speed to 1/500 or 1/1000. 


Observe your subject and break it down into its simple subject (single tone) components. Choose a Reference Tone.  A Reference Tone is a simple tone (one tone) usually chosen from the most important part of the subject. Once you have selected the Reference Tone, point the center of your viewfinder [+] at this tone and find its normal exposure. If your subject does not have a distinct single tone pick out a tone that is medium gray or brighter.


Let’s assume the "normal exposure" indicated by your camera for this Reference Tone is 500@f-8 (i.e., 1/500 sec. at an aperture setting of 8).
As you may know, the spotmeter’s "normal exposure" from any simple (single toned) surface will always provide the photographer with an 18% gray image tone (or a Grayscale density of 128 (out of 256) in photoshop on your home computer when you convert the image to black and white/grayscale).
The image tone that your camera's normal exposure provides is independent of the original tone of your subject!

CH2-0401.jpg (60594 bytes) CH2-0402.jpg (84770 bytes)

In spot metering, converting the "normal exposure" to the "correct exposure" is what a photographer must do. In other words, the "normal exposure" readings of the spotmeter must be interpreted by the photographer to determine the subject’s "correct exposure." The principle behind this simplified technique is that if one tone of a complex subject is exposed correctly, the rest of the tones follow and will also be correctly exposed . Now decide which one of the following tones would most closely matches your Reference Tone (please ignore the color): Black, Dark Gray, Medium Gray, Light Gray or White. With this simplified technique you must choose one of these five tones. Once you have decided which one of these five tones best matches your Reference Tone, then adjust your camera settings accordingly:


If you chose Black, you need to decrease the "normal exposure" setting by two stops. Decreasing the exposure time  by two stops converts the 18% gray image tone to Black. The correct exposure is now 1/2000@f-8 or equivalent.


If you chose Dark Gray, you need to decrease the "normal exposure" setting by one stop.  Decreasing the exposure time by one stop converts the 18% gray image tone to Dark gray. The correct exposure for this is 1/1000@f-8 or equivalent.


If you chose Medium Gray, leave the aperture and shutter speed as they are since the meter is already creating an 18% gray (Medium Gray) image tone, i.e., the tone of the image matches the approximate tone of the Reference Tone. Also remember that when metering from a medium gray surface, the "normal exposure" and "correct exposure" settings are approximately the same. In this case the correct exposure is 1/500@f-8 or equivalent.


If you chose Light Gray, you need to increase the "normal exposure" setting by one stop. Increasing the exposure time by one stop converts the 18% gray image tone to Light Gray. This results in a correct exposure of 1/250@f-8 or equivalent.


If you chose White, you need to increase the "normal exposure" setting by two stops. Increasing the exposure time by two stops converts the 18% gray image tone to White. The correct exposure would be 1/125@f-8 or equivalent.


coversm.jpg (18319 bytes)

| Why this book | The Author | Back Cover | Appendix |
| Sample Page | National Reviews | How to Order | Gallery |

amazon.jpg (8709 bytes)

Reader Reviews @ amazon.com

spauth1.jpg (19894 bytes)

| Fuji S7000 HOME | Fuji S7000 Diagram | Fuji S7000 Cheat Sheet | Fuji S7000 Technique |