30D: Technique
Home 30D: Diagram 30D: Cheat Sheets 30D: Technique

Canon EOS 30D Partial Metering/ Spot Metering operational cheat sheet

If you do not want to read the book titled "the confused photographer's guide to on-camera Spotmetering ISBN: 0966081706" simply read the following:

The on-camera spot meter is the most powerful exposure tool in the world but you have to know how to use it!
Read the following technique and decide for yourself if you understand the concept. If you do understand everything on the following page, and you can apply the technique described and produce correctly exposed images, then that is all you need! If, however, you even have the slightest doubt about this technique, or if you are still the least bit confused, this book is for you.
Remember: either you know how to use your spot meter effectively or you don’t. There is no in-between! I believe this is the simplest, easiest, best illustrated, and most practical exposure  book in the world!


Cheat sheet: The entire book condensed onto one page (well almost!)
(Based on Farzad's 5-stop Film / Digital Zone System ©1987-2007)

bullet

Set the ISO of your Canon EOS 30D to 100 and choose an outdoor subject. Activate the Spot metering/Partial Metering option on your 30D and set your camera’s mode to manual and to the shutter speed to 1/125. 

bullet

Observe your subject and break it down into its simple subject (single tone) components. Choose a Reference Tone.  A Reference Tone is a simple tone (one tone) usually chosen from the most important part of the subject. Once you have selected the Reference Tone, point your spot meter circle at this tone so that the spot frame falls WITHIN this simple tone and find its normal exposure. If your subject does not have a distinct single tone pick out a tone that is medium gray or brighter.

bullet

Let’s assume the "normal exposure" indicated by your camera for this Reference Tone is 125@f-8 (i.e., 1/125 sec. at an aperture setting of 8).
As you may know, the spotmeter’s "normal exposure" from any simple (single toned) surface will always provide the photographer with an 18% gray image tone (or a Grayscale density of 128 (out of 256) in photoshop on your home computer when you convert the image to black and white/grayscale).
The image tone that your camera's normal exposure provides is independent of the original tone of your subject. YOU MUST UNDERSTAND THIS since this is the foundation of the Zone System of Exposure!

CH2-0401.jpg (60594 bytes) CH2-0402.jpg (84770 bytes)
 

4.5%
Black

9%
Dark Gray

18%
Medium Gray

36%
Light Gray

72%
White

028
Gray Scale Density

078
Gray Scale Density

128
Gray Scale Density

178
Gray Scale Density

228
Gray Scale Densi
ty

The 5-Stop Tone Ruler, the ruler for our simplified Zone System with approximate GrayScale density (000-255) for your monitor 

 
bullet

In Zone System/spot metering, converting the "normal exposure" to the "correct exposure" is what a photographer must do. In other words, the "normal exposure" readings of the spotmeter must be interpreted by the photographer to determine the subject’s "correct exposure." The principle behind this simplified technique is that if one tone of a complex subject is exposed correctly, the rest of the tones follow and will also be correctly exposed . Now decide which one of the following tones would most closely matches your Reference Tone: Black, Dark Gray, Medium Gray, Light Gray or White. With this simplified technique you must choose one of these five tones. Once you have decided which one of these five tones best matches your Reference Tone, then adjust your camera settings accordingly:

bullet

If you chose Black, you need to decrease the "normal exposure" setting by two stops. Decreasing the exposure time  by two stops converts the 18% gray image tone to 4.5% Black (028 on Gray Scale). The correct exposure is now 1/125@f-16 or equivalent.

bullet

If you chose Dark Gray, you need to decrease the "normal exposure" setting by one stop.  Decreasing the exposure time by one stop converts the 18% gray image tone to Dark gray (078 on Gray Scale). The correct exposure for this is 1/125@f-11 or equivalent.

bullet

If you chose Medium Gray, leave the aperture and shutter speed as they are since the meter is already creating an 18% gray (Medium Gray - 128 on Gray Scale) image tone, i.e., the tone of the image matches the approximate tone of the Reference Tone. Also remember that when metering from a medium gray surface, the "normal exposure" and "correct exposure" settings are approximately the same. In this case the correct exposure is 1/125@f-8 or equivalent.

bullet

If you chose Light Gray, you need to increase the "normal exposure" setting by one stop. Increasing the exposure time by one stop converts the 18% gray image tone to Light Gray (178 on Gray Scale). This results in a correct exposure of 1/125@f-5.6 or equivalent.

bullet

If you chose White, you need to increase the "normal exposure" setting by two stops. Increasing the exposure time by two stops converts the 18% gray image tone to White (228 on Gray Scale). The correct exposure would be 1/125@f-4 or equivalent.

 

coversm.jpg (18319 bytes)

| Why this book | The Author | Back Cover | Appendix |
| Sample Page | National Reviews | How to Order | Gallery |

amazon.jpg (8709 bytes)

Reader Reviews @ amazon.com

E-mail
spauth1.jpg (19894 bytes)

Canon 30D Spot Metering
|Canon 30D Spot Metering: HOME|Canon 30D Spot Metering: Diagram|
|Canon 30D Spot Metering: Cheat Sheet|Canon 30D Spot Metering: Technique|

(Nikon, Canon, Sony, Pentax, and Minolta are trademarks of their respective companies)



©2006 BAHMAN FARZAD